Our thread adapter for IBC containers has a connection dimension of S60x6 (2" / DN50) and a 2" fine thread as outlet for further screw connections and connections such as pipes.
Our IBC spacer has a S60x6 coarse thread on both sides and a fixed connecting nut on the tank side. The perfect problem solver to extend the outlet of their IBC outlet valve and additionally mount other accessories. The outlet extension is 11cm / 4.33" long.Note: No direct mounting on the IBC inner tank! Always starting from the outlet valve! An attachment between inner container and IBC outlet valve does not withstand this spacer!
IBC adapter for water tanks to reduce from a standard size S60x6 to a 1" fine internal thread. Robust PE plastic and a PE foam gasket.
IBC containers that find their primary use in industry are partly equipped with so-called "camlock valves". This quick-change system offers many advantages in production.However, when adapting to the IBC standard thread S60x6, problems often occur. Camlock valves have a short fine thread at the outlet to be closed with a screw cap, e.g. for transport.This fine thread is available in two different sizes, depending on the manufacturer: 2 inch or 2 1/8 inch. The difference is hardly to see and also only clear with exact measuring.This IBC adapter allows a thread change from 2 1/8 inch to the IBC thread S60x6, in order to be able to attach any other screw connections.
The most common thread of the IBC outlet valves on the outlet side is the S60x6 (2" / DN50) coarse thread - external thread. For further connections, our IBC thread adapter is ideally suited, which has the same S60x6 coarse thread - internal thread as a connection to the IBC outlet valve. On the outlet side, the adapter has a G1" fine thread. This external thread is ideal for screwing on other accessories and adapters.The 1" fine thread offers stable hold and sufficient flow for standard plug-in couplings / click systems, claw couplings, pipe connections and much more. In case of sealing problems in connection with other adapters or connections, it is recommended to additionally seal the fine thread with PTFE tape or hemp. So if you want to remain flexible with the connection options to the IBC container and do not insist on ready-made IBC hose adapters, for example, the G1" IBC adapter is the best choice. The change of the respective connections is done by simply unscrewing and screwing on the firmly screwed IBC adapter, which remains fixed to the tap itself.
There are IBC containers which are equipped with different coarse and fine thread types. This IBC Adapter is ideal for adapting from a 2" fine thread IT to the standard size S60x6 (coarse thread - external thread).Attention: This thread adapter does not fit on most camlock valves! These usually have a 2 1/8" fine thread!
Universal gasket made of EPDM in a set of 5 suitable for S60x6 IT or other 2" IT.Dimensions:Outer diameter (OD): 54.7mm / 2.15"Inner diameter (ID): 44,5mm / 1.75"Width (W): 4.7mm / 0.19"Thickness (T): 4.5 +|- 0.5mm / 0.2 +|- 0.02"concave, punched
There are a variety of different IBC containers on the market. Often IBC tanks have an outlet size at the tap of S100x8. Since most adapters have the standard dimension S60x6, it becomes difficult to connect adapters to a larger diameter. To reduce to the standard thread S60x6, this adapter is the perfect problem solver! We always recommend a reduction to the standardized thread S60x6 as long as you do not need a larger flow.
Our IBC thread adapter has the standard dimension S60x6 (coarse thread - internal thread) as connection to an IBC outlet valve, which is already mounted ex works. On the outlet side, it has a 2" fine thread (external thread) for the connection of many other accessories such as piping.Thanks to the sturdy PP plastic, the adapter can be neatly screwed to the IBC valve and further connections to the IBC are no problem. In the 2 inch size, the maximum flow is guaranteed, which means that even large pipe and hose diameters can be connected to the container.A common application example is Storz couplings, also known as fire couplings, which in most cases have a fine thread as a connection thread. Especially here, large flow rates are required, which is why the IBC adapter variant to G2" fine thread is a good choice and at the same time leaves open the possibility of mounting other connections with the same thread.Alternatively, however, an IBC Storz direct connection can also be found in our online shop.
IBC thread adapter in standard variant for reducing a S60x6 coarse thread (internal thread) to a 0.75" fine thread (internal thread). The adapter is made of PE plastic and has a PE foam gasket.
Our spacer is also available in the pro version with a freely rotatable union nut for convenient mounting. Thanks to the anti-rotation protection (union nut), you can bring the extension incl. continuing adapter in the desired position, avoid slanted connections and the adapter does not have to be overtightened. On both sides, the outlet extension has a S60x6 coarse thread (internal thread x external thread).
Our IBC spacer is made of very thick-walled HDPE solid material and is therefore very resistant and stable. The HDPE plastic with a wall thickness of 16mm / 0.63" allows direct mounting of the IBC outlet extension to the inner container. You can also screw the spacer directly to the IBC outlet valve. On the outlet side and tank side, the extension has a coarse thread S60x6 (internal thread x external thread).
IBC containers often have a so-called camlock valve as the IBC outlet valve. Camlock valves differ in that they have a 2.125" (2 1/8") fine thread as an outlet.When mounting a standard 2" fine thread adapter to a camlock valve, problems often occur despite the small difference in size of the fine thread. This IBC adapter made of HDPE plastic is the problem solver and is specially designed for Camlock valves.
Our IBC adapter is the optimal problem solver to adapt from a S100x8 coarse thread at the IBC outlet dimension to a 2" fine thread (external thread). Thus you can directly connect further connections with a fine thread.
Adapter for IBCs without valve with S75x6 coarse thread for direct connection to the inner container. By adapting to a G2” internal thread, this adapter enables a wide variety of other adapters, pipes and much more to be screwed directly onto the IBC bottle.The S75x6 adapter is screwed onto the container in place of the otherwise pre-assembled IBC tap and has a seal on both sides to enable additional screw connections to be made easily.The G2” fine thread can also be reduced with appropriate fittings to realize small diameters and flow rates.
Our IBC adapter with a standard S60x6 thread as tank side connection and a 1.5" fine thread for the connection of further adapters.
Our IBC thread adapter with standard dimension S60x6 (internal thread - coarse thread) for connection to an IBC outlet valve and a 0.75" fine thread ET as outlet for further connections with accessories on an IBC container.
Our IBC adapter as a full material HDPE variant with a S60x6 coarse thread for connection to an IBC outlet valve reduced to a 0.75" fine thread on the outlet side. Ideal as a connection for heavy duty screw fittings as well as for operational use.The IBC thread adapter is machined from HDPE plastic. The material is very thick-walled and therefore also very resistant to external influences. In addition, the HDPE adapter has a long service life.
IBC thread adapter made of PP plastic and with a PE foam gasket is ideally suited to reduce from a common S60x6 coarse thread to a 0.75" fine thread. The professional version with a freely rotatable union nut (anti-twist protection) facilitates the assembly enormously.
Our IBC thread adapter with a standard S60x6 thread (coarse thread - internal thread) as connection to the tank and a 0.5" fine thread - internal thread for further connection of IBC accessories.
Double nipple adapter with male thread on both sides for bridging different connections.One side has the IBC standard thread S60x6, which means that many different IBC adapters can be connected.The other side is equipped with a G2" fine thread and therefore allows connection to common pipe systems and fittings. With this adapter, for example, IBC inlets can be realized or existing fine thread connections can be adapted to the IBC standard. The S60x6 coarse thread is also suitable for many canisters and drums and therefore helps to make other adapters and connection parts from the IBC sector usable.
This IBC thread adapter is specially designed for IBC containers with a fine thread M80x3 at the outlet of the IBC outlet valve. Our special adapter is suitable for Chinese IBC containers, so-called KingTainer.The IBC adapter is reduced to the standard dimension S60x6 (2" / DN50) to screw on further accessories without any problems. At the same time, the coarse thread (external thread) as an outlet ensures a stable hold and is very resistant.Note: The IBC adapter is supplied without gasket.
Practical IBC adapter with freely swiveling nut. This allows the adapter to be locked in any position so that further screw connections, taps and adapters are always perfectly aligned. The IBC adapter has the standard IBC thread S60x6 (internal thread) on the tank side and a standard G2" fine thread (internal thread) on the outlet side. This means that the adapter can be used for a wide variety of installation situations, both for IBC containers and for many canisters and some drums.
IBC adapter with a tank-side connection dimension S60x6 and as outlet a 0.5" fine thread - coarse thread for the screw connection with further accessories and pipes. The S60x6 thread is the most common thread in the field of IBC containers. The thread is installed as standard by almost all manufacturers.