IBC lid filter with a 2" fine thread - external thread suitable for IBC lids with a 2" fine thread (internal thread) bung opening. Smallest impurities are filtered out by the fine slit of the filter (0.75mm / 0.03").The filter has a length of 77cm / 30.32" and is screwed into the lid from below. Thanks to the length, the IBC filter is also suitable for 600l containers. At the bottom the filter tube is closed with an end cap.  

Our set consists of an IBC filter pipe with 2" fine thread ET and the matching IBC lid DN150 with a bung plug incl. vent. The lid has a S165x7 (DN150) coarse thread as tank-side connection. The 77cm / 30.32" long filter pipe is screwed into the bottom of the lid with a 2" fine thread. However, the bung plug must be removed from the lid beforehand.Scope of delivery: IBC lid DN150 with 1 bung plug and ventIBC filter with 2" fine thread ET

Flexible connection hose with a HT socket DN50 incl. gasket and on the other side a spigot end with DN50/DN40. The pipe is suitable for e.g. HT sleeves or pipe connections.

Our product set includes a filter with fine slot (0.75mm / 0.03") and a tank bushing S60x6 ET x 2" fine thread ET. This set is ideally suited to expand the IBC tank by an additional inlet with a filter pipe. Of course, the tank feedthrough also allows the connection of many other adapters.Procedure:You only have to drill a hole of approx. Ø 60mm / 2.36", screw the feedthrough on both sides and then screw the filter from the inside of the tank onto the 2" fine thread of the tank feedthrough. Done!Scope of delivery: IBC tank bushing S60x6 ET x 2" fine thread ETIBC filter with 2" fine thread IT

Filter pipe with fine slot width (0.75mm / 0.03") and a 2" fine thread - internal thread perfectly suitable in conjunction with a suitable tank feedthrough. The rainwater is thus not supplied via the IBC lid, but for example via a downpipe. Thus, the lid opening can still be used for other purposes, such as a level indicator. There is an end cap on the underside of the filter.