The thread adapters are made of PP plastic and are ideal for adapting from fine to coarse threads or for reducing a thread. The adapters are also very well suited for the attachment of hand pumps, for example.These adapters can be used for different barrels as well as for IBC containers.Scope of delivery:1x adapter 2" fine thread IT to 71mm IT [brown]1x adapter 2" fine thread IT to S60x6 ET [grey]1x adapter 2" fine thread IT to S60x6 IT [yellow]1x adapter 2" fine thread IT to 63mm IT [white]1x adapter S70x6 (Mauser) IT to S56x4 (Tri-Sure) ET [red]1x adapter 2" fine thread IT to S56x4 (Tri-Sure) ET [orange]1x adapter 2" fine thread IT to S70x6 (Mauser) ET [blue]1x adapter 2" fine thread IT to 51mm IT [green]1x adapter 2" fine thread ET to S60x6 ET [black]

COMPLETE drum pump set driven by a universal motor for safe and easy filling and transferring of aqueous solutions such as acids, alkalis and salts. The drum pump has a pumping unit made of PP with HC-wave and an outer diameter of 41mm / 1.61" and 1.25" connection thread.This drum pump is driven by a universal motor of 460 Watt / 230 V / 50 Hz, which has an attached 5m / 196.85" long cable with Schuko plug. The cable is double insulated according to protection class II. The drum pump further includes an overcurrent protection switch with undervoltage release.Content drum pump set:Universal motor 460 Watt / 230 V / 50 HzPumping unit made of polypropylene2m / 78.74" PVC hose 1" (NW 25)2 pcs. hose clamps made of stainless steel1 pcs. Polypropylene nozzle 1" (NW 25)ATTENTION: Before use, please check if the material of the pumping unit is resistant for the liquid to be pumped.Examples of use:Formic acid (up to 50%)Iron II and III chlorideAcetic acid (up to 80%)Sulfuric acid (up to 90%)Ammonium sulfide, aqueousAnthraquinone sulfonic acid, aqueousArsenic acid, aqueousAscorbic acid, aqueousBoric acid, aqueousChlorinated lime, aqueousChlorophenoxyacetic acid , aqueousProtein solutionsFluoroboric acid, aqueousFormaldehyde solution (formalin), aqueousHumic acids, aqueousPotassium hydroxide solution, aqueousMagnesium chloride, aqueousSodium hydroxide solution, aqueousOxalic acid, aqueousPhosphoric acid, aqueousPicric acid, aqueousAmmonia solution, aqueousHydrochloric acid, aqueous (36%)Starch solutionStearic acid, aqueousCitric acid, aqueousTartaric acidWater, distilledSea water➔ Delivery data with a 1" hose, test medium water 20°C / 68°F, pressure pipe 1", oval wheel meter, measured values +/- 5%.

Our IBC hand pump in the color yellow/white is ideal for thin-bodied and slightly aggressive liquids such as acids, alkalis and chemicals. Made of robust PP plastic with FKM (fluorocarbon rubber) seals for a long service life. The immersion tube is adjustable between 500 - 1400mm / 19.69 - 55.12" and has a diameter of max. 34mm / 1.34". The hand pump has a capacity of max 0.3 l/stroke, has a 0.75" hose connection and 2" thread.Attention: Please urgently check the resistance of the liquid to be pumped with FKM and PP.Application examples of liquids due to known resistances regarding the pump materials used (no warranty claims):Accumulic acid (sulfuric acid 20%)Aluminum chloride (aqueous)Aluminum sulfate (aqueous)Aminoacetic acid (aqueous)Ammonium chloride (aqueous)Malic acid (aqueous)Arabic acid (aqueous)Ascorbic acid (aqueous)Benzenesulfonic acid (aqueous)Hydrogen cyanide (aqueous)Lead acetate (aqueous)Boric acid (aqueous)Calcium bisulfite (aqueous)Calcium cholride (aqueous)Calcium nitrate (aqueous)Chromium sulfate (aqueous)Ferrous sulfate (aqueous)Glycolic acid (aqueous)Urea (aqueous)Yeast (aqueous)Potassium aluminum sulfate, alum (aqueous)Potassium iodide (aqueous)Potassium nitrate (aqueous)Potassium sulfite (aqueous)Maleic acid (aqueous)Manganese chloride (aqueous)Copper sulfate (aqueous)Cooling brine (aqueous)Note: The hand pump must NOT be used for pumping media of hazard classes A I/ A II, highly flammable media or in potentially explosive atmospheres.The necessary safety precautions must be taken for the hand pumps when filling and pumping hazardous liquids.The risk of accidents due to slipping on dirty surfaces and injuries due to spilled substances should be avoided as a matter of urgency. Please check whether toxic vapors can be generated by the liquid to be pumped.

Our drum pumps, driven by a universal motor, are best suited for emptying and transferring liquids in an IBC container. This barrel pump is especially suitable for food and has a pumping mechanism made of stainless steel 1.4571 with 41mm / 1.61" outer diameter, 1.25" connection thread and 1" hose connection. Other features:Overcurrent protection switch with integrated zero-voltage release5m / 196.85" cable with Schuko plugProtection class IP 24Double insulated according to protection class IISet consisting of:Universal motor 825 Watt / 230 V / 50 HzPump unit made of stainless steel 1.45712m / 78.74" food hose 1" (NW25)2 pcs. hose clamps made of stainless steel1 pcs. quick-action stopcock made of stainless steelPumping medium: Please check before use if the material of the pump is resistant for the liquid to be pumped.Examples of use:Animal and vegetable fats and oils.Dairy productsMineral waterFruit juicesThese are only suitable application examples due to known resistances with regard to the pump materials used. No warranty claims!! ATTENTION ! The pump must not be used for pumping flammable media or in explosive environments!➔ Pumping data with 1" hose, test medium 20°C / 68°F water, 1" pressure pipe, oval gear meter, measured values +/- 5%.

Hand pump in red made of PP plastic with EPDM gasket especially for alkaline media.It has an immersion tube length of 500-1400mm / 19.69-55.12", which is adjustable, and an immersion tube diameter of max. 34mm / 1.34". It has a capacity of max. 0.3 l/stroke and is suitable for 0.75" hoses.Before using the pump, please check that the materials PP and EPDM are resistant to the liquids to be pumped.Suitable examples:Caustic soda (diluted)Dishwashing detergentAcetaldehyde (aqueous)Aluminum acetate (aqueous)Ammonium acetate (aqueous)Ammonium nitrate (aqueous)Ammonium phosphate (aqueous)Chlorinated lime (aqueous)yellow blood liquor salt (aqueous)Potassium hydroxide solution (aqueous)Potassium carbonate (aqueous)Potassium chloride (aqueous)Sodium acetate (aqueous)Saline solutionCopper acetate (aqueous)Copper sulfate (aqueous)Cooling brine (aqueous)Lithium chloride (aqueous)Sodium arsenate (aqueous)This is a listing of suitable application examples due to known resistances regarding the pump materials used. No warranty claims.CAUTION! The hand pump must not be used for pumping media of hazard classes A I/ A II, highly flammable media or in potentially explosive atmospheres!The necessary safety precautions must always be taken for the hand pump when filling / pumping hazardous liquids.In particular, the risk of accidents due to slipping on dirty surfaces and injuries due to spilled substances should be avoided. Please also check whether toxic vapors can be generated by the liquid to be pumped.

Simple starter set with good price / performance ratio to pump quickly and flexibly. The set also includes a power supply 230V, 4m / 157.48" hose with nozzle valve.In different variants suitable for many applications and liquids.DELIVERY WITHOUT PICTURED NOZZLE HOLDER!In the submersible pump is a low-wear centrifugal pump installed, which can be operated with only 12V. The cable length is 1.5m / 59.06" and allows in combination with the included power supply the operation with 230V mains voltage. Due to the extremely narrow design (Ø 56mm / 2.2"), the pump can be used in almost all barrels and containers from 2" BSP (note max. cable length).Hose and cable are continuous and can therefore be adjusted to any container height.Further features and advantages areUser-friendlyCompact, light constructionVolume flow approx. 30 l/min with tap valveExternal dimensions of pump: length 160mm / 6.3", Ø 56mm / 2.2"Extremely quietIncl. bunghole adapter made of rubber NBRSuitable for 2" BSP and S70x6Easy tank change without screwingBend protection sleeve for cable and hoseIntegrated venting/venting valveHose clamp for fixation

We offer a complete set of drum pumps for emptying and transferring liquids. This barrel pump is perfectly suitable for neutral, aggressive and hardly flammable liquids such as chemicals, acids and alkalis.This pump is driven by a universal motor of 825 Watt / 230 V / 50 Hz. The drum pump has a 5m / 196.85" cable with Schuko plug, an overcurrent protection switch with undervoltage release and is double insulated according to protection class II.The pumping unit with HC shaft is made of PP and has an outer-Ø of 41mm / 1.61" and a 1.25" connection thread. The connection for the hose is 1" (DN25).Set Scope of delivery:Universal motor 825W / 230V / 50HzPolypropylene pumping unit2m / 78.74" PVC hose 1" (NW 25)2 pcs. hose clamps made of stainless steel1 pcs. polypropylene pumping nozzle 1" (NW 25)➔ Delivery data with a 1" hose, test medium water 20°C / 68°F, pressure pipe 1", oval wheel meter, measured values +/- 5%.

Our hand pump in the color blue / white is particularly well suited for the food industry. Thanks to the robust material made of PP plastic and the gasket made of fluoropolymer, you can easily convey and pump thin-bodied food with the pump.The hand pump has a 0.75" connection for hoses and a 2" thread. The immersion tube is adjustable between 500 - 1400mm / 19.69 - 55.12" and has a maximum diameter of 34mm / 1.34". Beware! Before using the pump, please check that the material of the hand pump is resistant with fluoropolymer and polypropylene.Examples of suitable applications based on known resistance to the pump materials include water, juices, beer, wine, sodas or thin olive oil. No warranty claims!Please ensure that the necessary safety precautions are taken for the hand pumps when filling and pumping hazardous liquids.In particular, the risk of accidents due to slipping on dirty surfaces and injuries due to spilled substances should be urgently avoided. It must also be checked whether toxic vapors can be generated by the liquid to be pumped.Attention: The hand pump must not be used for pumping media of hazard classes A I/ A II, highly flammable media or in potentially explosive atmospheres!

Simple starter set with good price / performance ratio to pump quickly and flexibly. The set also includes a power supply 230V, 4m / 157.48" hose with nozzle valve.In different variants suitable for many applications and liquids.DELIVERY WITHOUT PICTURED NOZZLE HOLDER!In the submersible pump is a low-wear centrifugal pump installed, which can be operated with only 12V. The cable length is 1.5m / 59.06" and allows in combination with the included power supply the operation with 230V mains voltage. Due to the extremely narrow design (Ø 56mm / 2.2"), the pump can be used in almost all barrels and containers from 2" BSP (note max. cable length).Hose and cable are continuous and can therefore be adjusted to any container height.Further features and advantages areUser-friendlyCompact, light constructionVolume flow approx. 30 l/min with tap valveExternal dimensions of pump: length 160mm / 6.3", Ø 56mm / 2.2"Extremely quietIncl. bunghole adapter made of rubber NBRSuitable for 2" BSP and S70x6Easy tank change without screwingBend protection sleeve for cable and hoseIntegrated venting/venting valveHose clamp for fixation

Our IBC hand pump in blue is particularly well suited for thin-bodied oils, antifreeze and diesel. The pump is made of PP plastic and has a gasket made of NBR (nitrile rubber). Also, the hand pump has a 0.75" hose connection and a 2" thread. The length of the immersion tube is adjustable between 500 - 1400mm / 19.69 - 55.12" and has a diameter of max. 34mm / 1.34".Before using the pump, please check if the liquid to be pumped is resistant with NBR and PP!Examples of use:DieselFuel oilAntifreeze (diluted)Mineral oilsmachine oilsother kerosene oilsSilicone oilThis is a list of suitable liquids due to known resistances concerning the used pump materials.! ATTENTION !The hand pump must NOT be used for pumping media of hazard classes A I/ A II, highly flammable media or in explosive environments!Please ensure that the necessary safety precautions are taken for the hand pump when filling and pumping hazardous liquids.Above all, avoid the risk of accidents caused by slipping on dirty surfaces and injuries caused by spilled substances. Likewise, urgently check whether toxic vapors can be generated by the liquid to be pumped.

Simple starter set with good price / performance ratio to pump quickly and flexibly. The set also includes a power supply 230V, 4m / 157.48" hose with nozzle valve.In different variants suitable for many applications and liquids.DELIVERY WITHOUT PICTURED NOZZLE HOLDER!In the submersible pump is a low-wear centrifugal pump installed, which can be operated with only 12V. The cable length is 1.5m / 59.06" and allows in combination with the included power supply the operation with 230V mains voltage. Due to the extremely narrow design (Ø 56mm / 2.2"), the pump can be used in almost all barrels and containers from 2" BSP (note max. cable length).Hose and cable are continuous and can therefore be adjusted to any container height.Further features and advantages areUser-friendlyCompact, light constructionVolume flow approx. 30 l/min with tap valveExternal dimensions of pump: length 160mm / 6.3", Ø 56mm / 2.2"Extremely quietIncl. bunghole adapter made of rubber NBRSuitable for 2" BSP and S70x6Easy tank change without screwingBend protection sleeve for cable and hoseIntegrated venting/venting valveHose clamp for fixation