COMPLETE drum pump set driven by a universal motor for safe and easy filling and transferring of aqueous solutions such as acids, alkalis and salts. The drum pump has a pumping unit made of PP with HC-wave and an outer diameter of 41mm / 1.61" and 1.25" connection thread.This drum pump is driven by a universal motor of 460 Watt / 230 V / 50 Hz, which has an attached 5m / 196.85" long cable with Schuko plug. The cable is double insulated according to protection class II. The drum pump further includes an overcurrent protection switch with undervoltage release.Content drum pump set:Universal motor 460 Watt / 230 V / 50 HzPumping unit made of polypropylene2m / 78.74" PVC hose 1" (NW 25)2 pcs. hose clamps made of stainless steel1 pcs. Polypropylene nozzle 1" (NW 25)ATTENTION: Before use, please check if the material of the pumping unit is resistant for the liquid to be pumped.Examples of use:Formic acid (up to 50%)Iron II and III chlorideAcetic acid (up to 80%)Sulfuric acid (up to 90%)Ammonium sulfide, aqueousAnthraquinone sulfonic acid, aqueousArsenic acid, aqueousAscorbic acid, aqueousBoric acid, aqueousChlorinated lime, aqueousChlorophenoxyacetic acid , aqueousProtein solutionsFluoroboric acid, aqueousFormaldehyde solution (formalin), aqueousHumic acids, aqueousPotassium hydroxide solution, aqueousMagnesium chloride, aqueousSodium hydroxide solution, aqueousOxalic acid, aqueousPhosphoric acid, aqueousPicric acid, aqueousAmmonia solution, aqueousHydrochloric acid, aqueous (36%)Starch solutionStearic acid, aqueousCitric acid, aqueousTartaric acidWater, distilledSea water➔ Delivery data with a 1" hose, test medium water 20°C / 68°F, pressure pipe 1", oval wheel meter, measured values +/- 5%.

Our drum pumps, driven by a universal motor, are best suited for emptying and transferring liquids in an IBC container. This barrel pump is especially suitable for food and has a pumping mechanism made of stainless steel 1.4571 with 41mm / 1.61" outer diameter, 1.25" connection thread and 1" hose connection. Other features:Overcurrent protection switch with integrated zero-voltage release5m / 196.85" cable with Schuko plugProtection class IP 24Double insulated according to protection class IISet consisting of:Universal motor 825 Watt / 230 V / 50 HzPump unit made of stainless steel 1.45712m / 78.74" food hose 1" (NW25)2 pcs. hose clamps made of stainless steel1 pcs. quick-action stopcock made of stainless steelPumping medium: Please check before use if the material of the pump is resistant for the liquid to be pumped.Examples of use:Animal and vegetable fats and oils.Dairy productsMineral waterFruit juicesThese are only suitable application examples due to known resistances with regard to the pump materials used. No warranty claims!! ATTENTION ! The pump must not be used for pumping flammable media or in explosive environments!➔ Pumping data with 1" hose, test medium 20°C / 68°F water, 1" pressure pipe, oval gear meter, measured values +/- 5%.

Simple starter set with good price / performance ratio to pump quickly and flexibly. The set also includes a power supply 230V, 4m / 157.48" hose with nozzle valve.In different variants suitable for many applications and liquids.DELIVERY WITHOUT PICTURED NOZZLE HOLDER!In the submersible pump is a low-wear centrifugal pump installed, which can be operated with only 12V. The cable length is 1.5m / 59.06" and allows in combination with the included power supply the operation with 230V mains voltage. Due to the extremely narrow design (Ø 56mm / 2.2"), the pump can be used in almost all barrels and containers from 2" BSP (note max. cable length).Hose and cable are continuous and can therefore be adjusted to any container height.Further features and advantages areUser-friendlyCompact, light constructionVolume flow approx. 30 l/min with tap valveExternal dimensions of pump: length 160mm / 6.3", Ø 56mm / 2.2"Extremely quietIncl. bunghole adapter made of rubber NBRSuitable for 2" BSP and S70x6Easy tank change without screwingBend protection sleeve for cable and hoseIntegrated venting/venting valveHose clamp for fixation

We offer a complete set of drum pumps for emptying and transferring liquids. This barrel pump is perfectly suitable for neutral, aggressive and hardly flammable liquids such as chemicals, acids and alkalis.This pump is driven by a universal motor of 825 Watt / 230 V / 50 Hz. The drum pump has a 5m / 196.85" cable with Schuko plug, an overcurrent protection switch with undervoltage release and is double insulated according to protection class II.The pumping unit with HC shaft is made of PP and has an outer-Ø of 41mm / 1.61" and a 1.25" connection thread. The connection for the hose is 1" (DN25).Set Scope of delivery:Universal motor 825W / 230V / 50HzPolypropylene pumping unit2m / 78.74" PVC hose 1" (NW 25)2 pcs. hose clamps made of stainless steel1 pcs. polypropylene pumping nozzle 1" (NW 25)➔ Delivery data with a 1" hose, test medium water 20°C / 68°F, pressure pipe 1", oval wheel meter, measured values +/- 5%.

Simple starter set with good price / performance ratio to pump quickly and flexibly. The set also includes a power supply 230V, 4m / 157.48" hose with nozzle valve.In different variants suitable for many applications and liquids.DELIVERY WITHOUT PICTURED NOZZLE HOLDER!In the submersible pump is a low-wear centrifugal pump installed, which can be operated with only 12V. The cable length is 1.5m / 59.06" and allows in combination with the included power supply the operation with 230V mains voltage. Due to the extremely narrow design (Ø 56mm / 2.2"), the pump can be used in almost all barrels and containers from 2" BSP (note max. cable length).Hose and cable are continuous and can therefore be adjusted to any container height.Further features and advantages areUser-friendlyCompact, light constructionVolume flow approx. 30 l/min with tap valveExternal dimensions of pump: length 160mm / 6.3", Ø 56mm / 2.2"Extremely quietIncl. bunghole adapter made of rubber NBRSuitable for 2" BSP and S70x6Easy tank change without screwingBend protection sleeve for cable and hoseIntegrated venting/venting valveHose clamp for fixation

Simple starter set with good price / performance ratio to pump quickly and flexibly. The set also includes a power supply 230V, 4m / 157.48" hose with nozzle valve.In different variants suitable for many applications and liquids.DELIVERY WITHOUT PICTURED NOZZLE HOLDER!In the submersible pump is a low-wear centrifugal pump installed, which can be operated with only 12V. The cable length is 1.5m / 59.06" and allows in combination with the included power supply the operation with 230V mains voltage. Due to the extremely narrow design (Ø 56mm / 2.2"), the pump can be used in almost all barrels and containers from 2" BSP (note max. cable length).Hose and cable are continuous and can therefore be adjusted to any container height.Further features and advantages areUser-friendlyCompact, light constructionVolume flow approx. 30 l/min with tap valveExternal dimensions of pump: length 160mm / 6.3", Ø 56mm / 2.2"Extremely quietIncl. bunghole adapter made of rubber NBRSuitable for 2" BSP and S70x6Easy tank change without screwingBend protection sleeve for cable and hoseIntegrated venting/venting valveHose clamp for fixation