Filter
Filter
–
Our IBC hand pump in blue is particularly well suited for thin-bodied oils, antifreeze and diesel. The pump is made of PP plastic and has a gasket made of NBR (nitrile rubber). Also, the hand pump has a 0.75" hose connection and a 2" thread. The length of the immersion tube is adjustable between 500 - 1400mm / 19.69 - 55.12" and has a diameter of max. 34mm / 1.34".Before using the pump, please check if the liquid to be pumped is resistant with NBR and PP!Examples of use:DieselFuel oilAntifreeze (diluted)Mineral oilsmachine oilsother kerosene oilsSilicone oilThis is a list of suitable liquids due to known resistances concerning the used pump materials.! ATTENTION !The hand pump must NOT be used for pumping media of hazard classes A I/ A II, highly flammable media or in explosive environments!Please ensure that the necessary safety precautions are taken for the hand pump when filling and pumping hazardous liquids.Above all, avoid the risk of accidents caused by slipping on dirty surfaces and injuries caused by spilled substances. Likewise, urgently check whether toxic vapors can be generated by the liquid to be pumped.
Product number:
PU0201
Our hand pump in the color blue / white is particularly well suited for the food industry. Thanks to the robust material made of PP plastic and the gasket made of fluoropolymer, you can easily convey and pump thin-bodied food with the pump.The hand pump has a 0.75" connection for hoses and a 2" thread. The immersion tube is adjustable between 500 - 1400mm / 19.69 - 55.12" and has a maximum diameter of 34mm / 1.34". Beware! Before using the pump, please check that the material of the hand pump is resistant with fluoropolymer and polypropylene.Examples of suitable applications based on known resistance to the pump materials include water, juices, beer, wine, sodas or thin olive oil. No warranty claims!Please ensure that the necessary safety precautions are taken for the hand pumps when filling and pumping hazardous liquids.In particular, the risk of accidents due to slipping on dirty surfaces and injuries due to spilled substances should be urgently avoided. It must also be checked whether toxic vapors can be generated by the liquid to be pumped.Attention: The hand pump must not be used for pumping media of hazard classes A I/ A II, highly flammable media or in potentially explosive atmospheres!
Product number:
PU0203
Hand pump in red made of PP plastic with EPDM gasket especially for alkaline media.It has an immersion tube length of 500-1400mm / 19.69-55.12", which is adjustable, and an immersion tube diameter of max. 34mm / 1.34". It has a capacity of max. 0.3 l/stroke and is suitable for 0.75" hoses.Before using the pump, please check that the materials PP and EPDM are resistant to the liquids to be pumped.Suitable examples:Caustic soda (diluted)Dishwashing detergentAcetaldehyde (aqueous)Aluminum acetate (aqueous)Ammonium acetate (aqueous)Ammonium nitrate (aqueous)Ammonium phosphate (aqueous)Chlorinated lime (aqueous)yellow blood liquor salt (aqueous)Potassium hydroxide solution (aqueous)Potassium carbonate (aqueous)Potassium chloride (aqueous)Sodium acetate (aqueous)Saline solutionCopper acetate (aqueous)Copper sulfate (aqueous)Cooling brine (aqueous)Lithium chloride (aqueous)Sodium arsenate (aqueous)This is a listing of suitable application examples due to known resistances regarding the pump materials used. No warranty claims.CAUTION! The hand pump must not be used for pumping media of hazard classes A I/ A II, highly flammable media or in potentially explosive atmospheres!The necessary safety precautions must always be taken for the hand pump when filling / pumping hazardous liquids.In particular, the risk of accidents due to slipping on dirty surfaces and injuries due to spilled substances should be avoided. Please also check whether toxic vapors can be generated by the liquid to be pumped.
Product number:
PU0202
Our IBC hand pump in the color yellow/white is ideal for thin-bodied and slightly aggressive liquids such as acids, alkalis and chemicals. Made of robust PP plastic with FKM (fluorocarbon rubber) seals for a long service life. The immersion tube is adjustable between 500 - 1400mm / 19.69 - 55.12" and has a diameter of max. 34mm / 1.34". The hand pump has a capacity of max 0.3 l/stroke, has a 0.75" hose connection and 2" thread.Attention: Please urgently check the resistance of the liquid to be pumped with FKM and PP.Application examples of liquids due to known resistances regarding the pump materials used (no warranty claims):Accumulic acid (sulfuric acid 20%)Aluminum chloride (aqueous)Aluminum sulfate (aqueous)Aminoacetic acid (aqueous)Ammonium chloride (aqueous)Malic acid (aqueous)Arabic acid (aqueous)Ascorbic acid (aqueous)Benzenesulfonic acid (aqueous)Hydrogen cyanide (aqueous)Lead acetate (aqueous)Boric acid (aqueous)Calcium bisulfite (aqueous)Calcium cholride (aqueous)Calcium nitrate (aqueous)Chromium sulfate (aqueous)Ferrous sulfate (aqueous)Glycolic acid (aqueous)Urea (aqueous)Yeast (aqueous)Potassium aluminum sulfate, alum (aqueous)Potassium iodide (aqueous)Potassium nitrate (aqueous)Potassium sulfite (aqueous)Maleic acid (aqueous)Manganese chloride (aqueous)Copper sulfate (aqueous)Cooling brine (aqueous)Note: The hand pump must NOT be used for pumping media of hazard classes A I/ A II, highly flammable media or in potentially explosive atmospheres.The necessary safety precautions must be taken for the hand pumps when filling and pumping hazardous liquids.The risk of accidents due to slipping on dirty surfaces and injuries due to spilled substances should be avoided as a matter of urgency. Please check whether toxic vapors can be generated by the liquid to be pumped.
Product number:
PU0200
Hand pumps
You want to conveniently drain the liquid from your IBC container and ensure a controlled discharge at the same time? Then our hand pumps are ideal for you. The robust material will not cause you any problems.