Drum-Heaters

This drum heating band is designed for controlled heating and temperature maintenance of standard 200 litre drums. With a heating output of 1500 W, it is particularly suitable for applications requiring increased heating capacity or shorter heating times. The integrated analog thermostat provides reliable temperature control up to 120 °C for a wide range of industrial processes.Product Benefits1500 W heating output for demanding industrial applicationsAnalog thermostat with temperature control from 0 to 120 °CCircumferential heating band for targeted heating of the drum wallSuitable for heating, temperature maintenance and controlled process heatingCan improve the flow characteristics of high-viscosity materialsMultiple heating bands can be combined where additional heating capacity is requiredIdeal in combination with a drum insulation jacket or insulation lid to improve thermal efficiencyTypical ApplicationsOils and lubricantsResinsWaxes and paraffinsAdhesivesChemicals and industrial process mediaIndustrial heating applications requiring increased heating performanceProduct DescriptionThe heating band is installed around the drum and transfers heat directly through the drum wall. Its higher heating output makes this version particularly suitable for applications where products need to be heated more quickly or maintained at a defined temperature over extended periods.The integrated analog thermostat provides straightforward and reliable temperature adjustment up to 120 °C. For improved thermal efficiency and more stable product temperatures, the heating band can be combined with a matching drum insulation jacket or insulation lid.   Important! Before use, check the manufacturer’s specifications regarding the maximum media temperature for the respective container (IBC, drum, canister, etc.). All temperatures listed are for guidance only.The temperatures that can be achieved depend on many variables, such as the ambient temperature, the supply voltage, the medium, the drum material, the drum size, whether an agitator is used, and much more.The heating element must only be operated on filled containers! DO NOT under any circumstances perform a “dry test.” This could damage the container or even cause it to melt.The heating element must be operated at a connection equipped with a properly rated residual current device (RCD) and circuit breaker.Be sure to read and follow the manufacturer’s instructions on the product and the manual for the proper operation of the heating element.

This drum heating band is designed for controlled heating and temperature maintenance of standard 200 litre drums. Unlike a full drum heating jacket, heat is transferred through a circumferential heating band positioned around the drum. The integrated analog thermostat provides simple and reliable temperature control up to 120 °C for a wide range of industrial applications.Product Benefits1000 W heating output for controlled temperature managementAnalog thermostat with temperature control from 0 to 120 °CFlexible installation around the drumSuitable for heating and maintaining liquids at processing temperatureImproves the flow characteristics of high-viscosity materialsMultiple heating bands can be combined depending on the applicationIdeal in combination with insulation lids or drum insulation jackets to improve energy efficiencyTypical ApplicationsOils and lubricantsResinsWaxes and paraffinsAdhesivesChemicals and industrial process mediaTemperature maintenance during storage and productionProduct DescriptionThe heating band is fitted around the drum and transfers heat directly through the drum wall. This design provides flexible positioning and is particularly suitable for applications where full-surface drum heating is not required.The integrated analog thermostat allows straightforward temperature adjustment up to 120 °C. For improved temperature stability and energy efficiency, the heating band can be combined with a matching drum insulation jacket or insulation lid to reduce heat loss during operation.  Important! Before use, check the manufacturer’s specifications regarding the maximum media temperature for the respective container (IBC, drum, canister, etc.). All temperatures listed are for guidance only.The temperatures that can be achieved depend on many variables, such as the ambient temperature, the supply voltage, the medium, the drum material, the drum size, whether an agitator is used, and much more.The heating element must only be operated on filled containers! DO NOT under any circumstances perform a “dry test.” This could damage the container or even cause it to melt.The heating element must be operated at a connection equipped with a properly rated residual current device (RCD) and circuit breaker.Be sure to read and follow the manufacturer’s instructions on the product and the manual for the proper operation of the heating element.

This drum base heater is designed for controlled heating of standard 200 litre drums. Unlike a drum heater that transfers heat through the drum wall, the base heater applies heat directly through the bottom of the container. This makes it particularly suitable for materials that settle at the base or require additional heat input from below. The integrated digital controller provides accurate temperature control up to 120 °C.Product BenefitsDirect heat transfer through the bottom of the drumDigital temperature control up to 120 °CSupports heating of high-viscosity and sedimenting materialsImproves overall temperature distribution inside the drumIdeal addition to drum heaters and insulation jacketsHeavy-duty construction for industrial use230 V Schuko plug for quick installationTypical ApplicationsOils and lubricantsResinsWaxes and paraffinsAdhesivesChemicals and industrial process mediaApplications requiring additional heat input at the drum baseProduct DescriptionMany industrial materials become highly viscous or begin to settle at the bottom of the drum during storage. By applying heat directly through the drum base, the heater targets the area where additional thermal energy is often most beneficial. This can improve material flow and assist in melting solidified product residues.The drum base heater can be used either as a standalone heating solution or together with a drum heater. When combined with a heating jacket and insulation jacket, it helps achieve more uniform heat distribution throughout the drum while reducing heating times and improving overall energy efficiency. Important!Before use, check the manufacturer’s specifications regarding the maximum media temperature for the respective container (IBC, drum, canister, etc.). All temperatures listed are for guidance only.The temperatures that can be achieved depend on many variables, such as the ambient temperature, the supply voltage, the medium, the drum material, the drum size, whether an agitator is used, and much more.The heating element must only be operated on filled containers! DO NOT under any circumstances perform a “dry test.” This could damage the container or even cause it to melt.The heating element must be operated at a connection equipped with a properly rated residual current device (RCD) and circuit breaker.Be sure to read and follow the manufacturer’s instructions on the product and the manual for the proper operation of the heating element.

This insulation lid has been developed to complement drum heaters used in food, pharmaceutical and similar industrial applications. It reduces heat loss through the top of the drum and supports more consistent temperature retention during heating and temperature maintenance. This helps improve the overall efficiency of the heating system while maintaining stable process conditions.Product BenefitsDesigned for Food & Pharmaceutical drum heating applicationsReduces heat loss through the top of the drumSupports more uniform product temperaturesImproves the efficiency of the complete heating systemSuitable for applications up to 200 °CPassive insulation solution without electrical componentsIdeal addition to matching insulation jackets and drum heatersTypical ApplicationsFood ingredients and food processing materialsPharmaceutical intermediatesCosmetic raw materialsTemperature-sensitive process mediaIndustrial applications requiring high-performance insulation materialsProduct DescriptionA considerable amount of thermal energy can escape through the top surface of a heated drum. The insulation lid helps minimise these losses and supports more stable product temperatures throughout the heating process. This contributes to improved energy efficiency and more consistent processing conditions.The Food & Pharmaceutical version uses materials intended for applications requiring high temperature resistance and demanding material properties. According to the manufacturer, FDA-compliant silicone-coated glass fibre fabric is used in this version. For optimum thermal performance, the insulation lid can be combined with a matching insulation jacket.

This drum heater has been developed for applications in the food, pharmaceutical and cosmetics industries where controlled heating and accurate temperature management are essential. The integrated digital controller allows precise temperature adjustment up to 120 °C while supporting consistent product quality throughout the heating process.Product BenefitsDesigned for food, pharmaceutical and cosmetic applicationsAccurate digital temperature control up to 120 °CProvides uniform heating across the drum surfaceImproves the flow characteristics of temperature-sensitive materialsSuitable for controlled industrial heating processesQuick installation using adjustable fastening strapsCompatible with matching insulation jackets and insulation lids to improve energy efficiencyTypical ApplicationsFood ingredients and food processing materialsPharmaceutical intermediatesCosmetic raw materialsSyrups and concentratesOils, fats and waxesOther temperature-sensitive process mediaProduct DescriptionMany raw materials become increasingly viscous at lower temperatures, making pumping and dispensing more difficult. By distributing heat evenly around the drum wall, the heater improves product flow while maintaining stable processing conditions and consistent product quality.The Food & Pharmaceutical version is intended for applications where accurate temperature control and suitable construction materials are important. When combined with a matching insulation jacket or insulation lid, heat loss can be reduced further, improving the overall efficiency of the heating system.   Important! Before use, check the manufacturer’s specifications regarding the maximum media temperature for the respective container (IBC, drum, canister, etc.). All temperatures listed are for guidance only.The temperatures that can be achieved depend on many variables, such as the ambient temperature, the supply voltage, the medium, the drum material, the drum size, whether an agitator is used, and much more.The heating element must only be operated on filled containers! DO NOT under any circumstances perform a “dry test.” This could damage the container or even cause it to melt.The heating element must be operated at a connection equipped with a properly rated residual current device (RCD) and circuit breaker.Be sure to read and follow the manufacturer’s instructions on the product and the manual for the proper operation of the heating element.

This high-temperature insulation lid is designed for drum heating systems operating at temperatures up to 200 °C. It reduces heat loss through the top of the drum and supports more uniform temperature distribution inside the container. When used together with a high-temperature drum heater, it helps improve energy efficiency and maintain stable process conditions.Product BenefitsDesigned for high-temperature applications up to 200 °CReduces heat loss through the top of the drumImproves the efficiency of high-temperature drum heating systemsSupports more stable product temperaturesCan reduce heating times and energy consumptionPassive insulation solution without electrical componentsIdeal addition to high-temperature heating jackets for 200 litre drumsTypical ApplicationsHigh-temperature drum heating systems up to 200 °CBitumen and bitumen-based materialsIndustrial resinsParaffins and waxesIndustrial chemicals requiring elevated temperaturesProcess media requiring stable operating temperaturesProduct DescriptionDuring high-temperature heating processes, a considerable amount of heat can escape through the top surface of the drum. The insulation lid helps minimise these losses, improving the overall efficiency of the heating system while supporting a more uniform product temperature throughout the container.The insulation lid is designed to complement high-temperature drum heaters and other insulation components. By reducing heat loss, it helps maintain process temperatures for longer periods while lowering unnecessary energy consumption.

This high-temperature drum heater is designed for industrial processes requiring high heating performance and temperatures up to 200 °C. With a heating output of 1500 W, it is particularly suitable for highly viscous materials or applications where faster heating of larger liquid volumes is required. The integrated digital controller enables precise temperature adjustment for demanding industrial processes.Product Benefits1500 W heating power for demanding industrial heating applicationsTemperature control up to 200 °CSuitable for high-viscosity and temperature-sensitive materialsDigital controller for accurate and repeatable temperature controlUniform heat transfer across the drum surfaceQuick installation using adjustable fastening strapsCompatible with insulation jackets and insulation lids to improve thermal efficiencyTypical ApplicationsBitumen and bitumen-based productsIndustrial resinsParaffins and waxesHigh-viscosity adhesivesIndustrial chemicals requiring elevated temperaturesHigh-temperature manufacturing processesProduct DescriptionMany industrial materials require elevated temperatures before they can be processed efficiently. By distributing heat evenly around the drum wall, the heater improves flow characteristics while maintaining stable processing conditions. This helps reduce production interruptions caused by materials becoming too viscous.With its increased heating capacity, this version is particularly suitable for applications requiring higher heat input or reduced heating times. The integrated digital controller provides accurate temperature control up to 200 °C. For maximum thermal efficiency, the heater can be combined with a matching insulation jacket or insulation lid to minimise heat loss during operation.   Important! Before use, check the manufacturer’s specifications regarding the maximum media temperature for the respective container (IBC, drum, canister, etc.). All temperatures listed are for guidance only.The temperatures that can be achieved depend on many variables, such as the ambient temperature, the supply voltage, the medium, the drum material, the drum size, whether an agitator is used, and much more.The heating element must only be operated on filled containers! DO NOT under any circumstances perform a “dry test.” This could damage the container or even cause it to melt.The heating element must be operated at a connection equipped with a properly rated residual current device (RCD) and circuit breaker.Be sure to read and follow the manufacturer’s instructions on the product and the manual for the proper operation of the heating element.

This high-temperature drum heater is designed for industrial applications requiring process temperatures of up to 200 °C. It is particularly suitable for heating high-viscosity materials and products that require elevated temperatures before pumping, dispensing or further processing. The integrated digital controller enables precise temperature adjustment to suit demanding production environments. Product Benefits Temperature control up to 200 °C for high-temperature applications Designed for demanding industrial heating processes Improves the flow characteristics of high-viscosity materials Digital controller for accurate and repeatable temperature control Uniform heat distribution across the drum surface Quick installation using adjustable fastening straps Compatible with insulation jackets and insulation lids for improved thermal efficiency Typical Applications Bitumen and bitumen-based products Industrial resins Waxes and paraffins High-viscosity adhesives Chemicals requiring elevated processing temperatures High-temperature industrial manufacturing processes Product Description Many industrial materials only achieve their required processing characteristics at elevated temperatures. By transferring heat evenly through the drum wall, the heater improves material flow while helping maintain stable production conditions. This allows viscous products to be processed more efficiently and consistently. The integrated digital controller provides precise temperature adjustment up to 200 °C, making the heater suitable for demanding industrial heating applications. For improved energy efficiency and temperature stability, it can be combined with a matching insulation jacket or insulation lid to minimise heat loss during operation. Important!Before use, check the manufacturer’s specifications regarding the maximum media temperature for the respective container (IBC, drum, canister, etc.). All temperatures listed are for guidance only.The temperatures that can be achieved depend on many variables, such as the ambient temperature, the supply voltage, the medium, the drum material, the drum size, whether an agitator is used, and much more.The heating element must only be operated on filled containers! DO NOT under any circumstances perform a “dry test.” This could damage the container or even cause it to melt.The heating element must be operated at a connection equipped with a properly rated residual current device (RCD) and circuit breaker.Be sure to read and follow the manufacturer’s instructions on the product and the manual for the proper operation of the heating element.

This insulation lid is designed to complement drum heaters and insulation jackets used with 200 litre drums. It reduces heat loss through the top surface of the drum and helps maintain a more stable temperature inside the container. When used together with a drum heater, the additional insulation can support shorter heating times and more efficient energy use. Product Benefits Reduces heat loss through the upper surface of the drum Supports more stable temperature maintenance inside the drum Useful addition to drum heaters, heating jackets and insulation jackets Can help shorten heating times and reduce energy consumption Provides additional protection against direct sunlight and ambient influences Passive insulation solution without electrical connection Suitable for industrial storage and production environments Typical Applications Additional insulation for heated 200 litre drums Temperature maintenance of oils, resins, waxes and adhesives Reduction of heat loss during longer heating or holding periods Support for freeze protection of temperature-sensitive media Supplementary insulation during storage and processing of industrial liquids Product Description When drums are heated, part of the supplied heat is lost through the upper drum surface. The insulation lid helps reduce this loss and improves the overall efficiency of the heating setup. In combination with a drum heater or insulation jacket, heat is retained more effectively inside the container, which is particularly useful for viscous or temperature-sensitive media. As a passive insulation component, the lid does not require an electrical connection. It is simply placed on the suitable drum and can be combined with heating jackets, base drum heaters or insulation jackets depending on the application. The lid is intended for industrial use where liquids need to be kept at temperature or protected against cooling over extended periods.

This drum heater is designed for controlled heating, temperature maintenance and frost protection of liquids stored in standard drums. It is intended for industrial applications where process media need to be maintained at a defined temperature or gently heated prior to processing. The integrated temperature controller enables precise temperature adjustment to support stable and repeatable production processes. Important!Before use, check the manufacturer’s specifications regarding the maximum media temperature for the respective container (IBC, drum, canister, etc.). All temperatures listed are for guidance only.The temperatures that can be achieved depend on many variables, such as the ambient temperature, the supply voltage, the medium, the drum material, the drum size, whether an agitator is used, and much more.The heating element must only be operated on filled containers! DO NOT under any circumstances perform a “dry test.” This could damage the container or even cause it to melt.The heating element must be operated at a connection equipped with a properly rated residual current device (RCD) and circuit breaker.Be sure to read and follow the manufacturer’s instructions on the product and the manual for the proper operation of the heating element. Product Benefits Provides uniform heat distribution across the drum surface for consistent heating of the contents Reduces the viscosity of high-viscosity liquids, improving pumping, dispensing and processing Protects temperature-sensitive media against freezing during storage and operation Digital temperature control for accurate and repeatable heating processes Quick and easy installation using adjustable fastening straps Designed for continuous use in industrial and commercial environments Can be combined with insulated drum lids or drum base heaters to minimise heat loss and improve energy efficiency Typical Applications Heating oils and lubricants Temperature conditioning of resins, adhesives and waxes Freeze protection for chemicals and process liquids Improving the flow characteristics of high-viscosity media Maintaining stable process temperatures during storage and production Product Description As ambient temperatures decrease, many liquids become more viscous and increasingly difficult to pump or process. By heating the drum wall evenly, thermal energy is transferred gradually to the contents, improving flow characteristics and ensuring reliable processing. At the same time, unwanted temperature fluctuations during storage and production can be significantly reduced. The integrated temperature controller allows the heating process to be adjusted to the specific application requirements. This makes the drum heater suitable for both frost protection and controlled heating of a wide range of industrial media within its specified operating temperature range. For optimum energy efficiency, the heater can be combined with a matching insulated drum lid or insulation jacket to reduce heat loss and shorten heating times.