IBC Container 1000l on PES-pallet with 3" valve - used, residue empty, food syrup
| Quantity | Unit price |
|---|---|
| To 1 | €140.00 |
| To 3 | €134.05 |
| To 5 | €128.10 |
| To 7 | €122.15 |
| From 8 | €116.20 |
Sold out
Product information
The tank has a volume of 1000 liters and is mounted on a plastic pallet, this has a steel bearing surface.
The container comes from the food industry and was disposed of and reprocessed according to regulations after use. Previously, the tank was filled with syrup and was then emptied of residue. This may leave small residues, but you can easily rinse them out yourself with warm water and detergent. The IBC container is in very good condition!
The image is an example and may vary depending on the manufacturer. A selection is not possible.
| Food safe: | No |
|---|---|
| Outlet size: | S100x8 (3" / DN80) coarse thread - external thread |
| UN approval: | No |
| Material: | HDPE |
| Thread: | Coarse thread |
| GPSR: | Manufacturer / EU Representative: Barrel Trading GmbH & Co. KG, Waagäckerstr. 14, 74405 Gaildorf, Germany / info@barrel-trading.com |
| Length: | 1200mm / 47.24" |
| Width: | 1000mm / 39.37" |
| Height: | 1163mm / 45.79" |
| Weight: | 50 kg |
| Pallet: | PES |
| IBC inner container: | transparent |
| IBC valve: | DN80 |
| IBC volume: | 1000 liters |
| Condition: | Used |
Login
Passende Ersatzprodukte
GREIF IBC lid DN225 original in the color green. This variant is closed without any bung openings. The lid is screwed to the top of the IBC container with a sturdy coarse thread. Suitable for IBC tank of the manufacturer GREIF or containers of the same construction. Also available in the color black and in the variant with bung opening.
Original IBC lid DN225 from GREIF with a bung plug including vent valve. The lid has a S240x6 coarse thread as connection to the lid opening of the container and a S56x4 thread at the bung opening.Also available in these variants:DN225 - closed in blackDN225 - closed in green
The lid is located on the top of the IBC container and is, along with the valve, one of the most wanted parts. The standard size corresponds to DN150 (diameter of approx. 150mm / 5.91"), which is most often installed in IBC tanks.The IBC lid allows you to refill conveniently and also this screw lid has a vent valve included in the plug. The bung plug is screwed into a 2" fine thread - internal thread.Thanks to the 2" bung opening, of course, many other connections be connected to the IBC tank such as:IBC inletIBC lid filterIBC lid hose connectionIBC overflow
Our IBC lid with two bung plugs for various inlets and outlets. The lid is attached to the top of the IBC container and assures you easy refilling. The bung openings have a 2" fine thread (internal thread) and are closed with a screwed-in bung plug. As tank connection the lid has a S165x7 (DN150) coarse thread.With the 2" fine thread as bung opening, numerous connections can be realized, such as:IBC inletIBC lid filterIBC lid hose connectionIBC overflow
IBC lid of the manufacturer SCHÜTZ in the variant closed without bung opening is ideal as a replacement screw lid for the opening at the top of your IBC container. The lid has the size DN225 (approx. Ø255 mm / 10.04") and is screwed on the tank side with a coarse thread S245x6. The original lid from SCHÜTZ is also compatible with many other manufacturers - but not with IBC containers from the manufacturer WERIT.Also available in the following variant:Bung plug incl. vent
SCHÜTZ IBC lid size DN225 with a 2" bung plug including vent for uncomplicated filling of the IBC container. The lid has a coarse thread S245x6 as tank connection. Also suitable for IBC tanks of the same design, but not compatible with IBCs of the manufacturer WERIT. Also available in the following variant:closed without vent
WERIT IBC lid DN150 in the closed variant for uncomplicated refilling of your IBC container. The lid has a coarse thread S160x7 as tank connection, suitable for WERIT IBC containers.Original WERIT IBC lid also available in the following variants:DN150 - bung plug including vent valveDN225 - closed without bung plugDN225 - bung plug including vent valve
Original IBC screw lid from the manufacturer WERIT in the standard size DN150 with a bung plug including vent. The lid is perfect for refilling at the WERIT IBC tank and is screwed to the lid opening with a coarse thread S160x7.WERIT lids also available in the following variants available:DN150 - closed without bung openingDN225 - closed without bung openingDN225 - bung plug including vent valve
Original WERIT IBC lid in the special size DN225 in the variant closed without bung openings. The original lid is suitable for IBC containers of the manufacturer WERIT or IBCs of the same design. The connection to the lid opening is made by a S240x6 coarse thread.Also available in the following variants:DN150 - closed without bung openingDN150 - bung plug including vent valveDN225 - bung plug including vent valve
Original WERIT IBC lid with dimension DN225 and a bung plug including vent valve. The screw lid is screwed with a coarse thread S240x6 to the lid opening of the IBC container from WERIT or identical in construction.Also available in the following variants:DN150 - closed without bung plugDN150 - bung plug including vent valveDN225 - closed without bung opening
Kunden kauften auch
Clamp gasket flanged from the robust material EPDM 70P. Suitable for thread size DN 50. The gasket has the following dimensions: Outer diameter (OD): 64 mm / 2.52"Inner diameter (ID): 50.2 mm / 1.98"Width (W): 8 mm / 0.31"Thickness (T): 6 mm / 0.24"Other important properties: DIN 32676 UE* FDA 21REACH: 1907/2006RoHS: RoHS3
Our IBC adapter is the optimal problem solver to adapt from a S100x8 coarse thread at the IBC outlet dimension to a 2" fine thread (external thread). Thus you can directly connect further connections with a fine thread.
There are a variety of different IBC containers on the market. Often IBC tanks have an outlet size at the tap of S100x8. Since most adapters have the standard dimension S60x6, it becomes difficult to connect adapters to a larger diameter. To reduce to the standard thread S60x6, this adapter is the perfect problem solver! We always recommend a reduction to the standardized thread S60x6 as long as you do not need a larger flow.
With an IBC butterfly valve, containers in the private as well as in the commercial sector can be emptied quickly and easily. The connection to the tank has a S100x8 (3" / DN80) coarse thread - internal thread. On the outlet side, the valve also has a thread with the dimension S100x8 (3" / DN80). The coarse thread assures you a stable and tight water withdrawal.However, given the large diameter, the IBC butterfly valve is more difficult to operate. Therefore, we recommend to reduce the connection of corresponding tanks, provided that you are not dependent on the dimension S100x8.
This IBC drip pan made of high-quality PE is used when it is necessary to safely collect water-polluting substances and to store hazardous substances in an environmentally friendly, professional and safe manner.Corrosive, flammable, explosive, oxidizing or toxic hazardous substances must be handled and stored with special care - an important topic in every company!Especially in the area of IBC containers, solid solutions with an optimal price-performance ratio are required. This is what drip pans made of PE plastic offer.Made of high quality PEWith galvanized steel gridCollecting volume 1100LCan be driven under with forklift or pallet truck*Stackable into each other for transport*High chemical resistance*Transport only in empty condition!
Ideal handling due to space-saving design and optimized foot constructionTransport with pallet truck or forklift: underride height 100mm / 3.94" with fork pocketsStable and safe welded constructionApproved for the storage of substances hazardous to waterWith nationwide valid declaration of conformity (ÜHP) according to StawaRLeak test with factory test certificateThe removable grating is hot-dip galvanized and serves as a levelling element
Ideal handling due to space-saving design and optimized foot constructionTransport with pallet truck or forklift: underride height 100mm / 3.94" with fork pocketsStable and safe welded constructionApproved for the storage of substances hazardous to waterWith nationwide valid declaration of conformity (ÜHP) according to StawaRLeak test with factory test certificateThe removable grating is hot-dip galvanized and serves as a levelling element
For easy and controlled water withdrawal from your IBC container, we recommend an IBC outlet nozzle. This is screwed directly onto the already pre-assembled outlet valve. Thanks to the robust PE plastic, the outlet nozzle remains durable and stable.On both sides, the IBC outlet nozzle has an S100x8 coarse thread (internal thread x external thread). It is angled at 45°.Please note: No hoses should be connected to the outlet nozzle, as they can break quickly due to the weight of the hose and the load of the filling material.
Ideal and stable elevation for your IBC!Made of galvanized steelIncluding grating as a footprintIdeal filling height for buckets, canisters, watering cans, etc.Suitable for 1x 1000L IBC (120x100 cm / 47.24x39.37") or smallerThe problem with the use of IBCs is usually only the filling from the container into another container.Especially during operation, the IBC valve at the bottom can be very obstructive. But also in the garden when filling a watering can.This IBC substructure solves the problem and can also be used for smaller containers. Due to the inserted grid, containers, barrels and other containers can be easily elevated and used.*Delivery does not include the IBC containers shown. Shown for illustrative purposes only.
IBC screw cap suitable for IBC outlet valves with outlet size S100x8 (3" / DN80). The coarse thread guarantees you a stable hold. A PE foam gasket is also included. The screw aids on the top of the cap prevent slipping when tightening to the IBC.
IBC design cover with printed wood pattern for an attractive design and a safe protection against UV radiation. With our design covers made of PVC/PE with 400g/m² you prevent unnecessary algae formation in the filling material as well as clouding and embrittlement of your IBC tank. The velcro fastener on the front still allows access to the outlet valve. No opening is pre-cut for the lid of the IBC container. Please clean only with a damp cloth! Do not use any cleaning agent!Due to its size, the cover is packed folded and this may cause small breaks in the printed image. However, these are only visible from a short distance.