IBC lid DN150 with 1 bung plug and vent
Product number:
YP0147
EAN:
4260411311478
Product information
The lid is located on the top of the IBC container and is, along with the valve, one of the most wanted parts. The standard size corresponds to DN150 (diameter of approx. 150mm / 5.91"), which is most often installed in IBC tanks.
The IBC lid allows you to refill conveniently and also this screw lid has a vent valve included in the plug. The bung plug is screwed into a 2" fine thread - internal thread.
Thanks to the 2" bung opening, of course, many other connections be connected to the IBC tank such as:
The IBC lid allows you to refill conveniently and also this screw lid has a vent valve included in the plug. The bung plug is screwed into a 2" fine thread - internal thread.
Thanks to the 2" bung opening, of course, many other connections be connected to the IBC tank such as:
- IBC inlet
- IBC lid filter
- IBC lid hose connection
- IBC overflow
IBC lid DN150 with 1 bung plug and vent
| Food safe: | Nein |
|---|---|
| Gasket: | PVC |
| Measured diameter: | 155 - 164 mm |
| Compatible with: | SCHÜTZ ** |
| Tank connection: | S165x7 (DN150) coarse thread - internal thread |
| Material: | PE |
| Thread: | Coarse thread |
| UN approval: | No |
| Color: | red |
| Bung opening: | 2" fine thread - internal thread |
| Vent valve: | Yes |
Data according to manufacturer. Errors and changes reserved.
Login
Passend zu diesem Artikel
Adapter S56x4 AG to G2 inch IT for drums, barrels, IBC and canisters
€10.00*
Suitable adapter for various vessels such as IBC containers, drums with bunghole and for corresponding canisters. The adapter is adapted from an S56x4 coarse thread (external thread) to a G2 inch internal thread (fine thread) in order to easily attach additional screw connections. The typical drum thread with S56x4 (also known as the "TriSure coarse thread") has always been used increasingly in the field of intermediate bulk containers (IBCs). This thread is often used for bung openings in IBC lids. It is primarily used to screw on degassing valves or to attach riser pipes. With this adapter from S56x4 to G2" fine thread, almost any other screw connections, outlet taps, inlets or combinations can be implemented.
Product number:
4000076
IBC lid-wrench DN150 - stainless steel
€79.83*
Variant:
DN150 - stainless steel
Our lid-wrench suitable for IBC lid DN150 made of high quality and robust stainless steel 1.4301. If the lid is difficult or impossible to open due to sticking or for other reasons, our IBC lid-wrenches provide relief.
Product number:
ES484
Variants from €54.61*
Filter
IBC lid filter with 2" fine thread ET
€16.80*
Tank connection:
2" fine thread - external thread
IBC lid filter with a 2" fine thread - external thread suitable for IBC lids with a 2" fine thread (internal thread) bung opening. Smallest impurities are filtered out by the fine slit of the filter (0.75mm / 0.03").The filter has a length of 77cm / 30.32" and is screwed into the lid from below. Thanks to the length, the IBC filter is also suitable for 600l containers. At the bottom the filter tube is closed with an end cap.
Product number:
DF-AG