IBC standard tank connection DN25 basic module for 2 tanks
Product information
Our standard tank connection set for connecting two IBC containers. The IBC tanks must stand next to each other and should not be stacked. The connection to the IBC valve is made via a hose adapter with coarse thread S60x6 and a more rotatable union nut (anti-twist protection) for uncomplicated assembly.
The anti-twist protection allows you to screw the set together as a whole in advance and then mount it to the IBC valve. The hose does not have to be turned! On the outlet side, a small valve with 0.5" plug-in coupling is attached for a controlled liquid withdrawal.
Scope of delivery:
Set is delivered WITHOUT pictured IBC containers.
The anti-twist protection allows you to screw the set together as a whole in advance and then mount it to the IBC valve. The hose does not have to be turned! On the outlet side, a small valve with 0.5" plug-in coupling is attached for a controlled liquid withdrawal.
Scope of delivery:
- 2x IBC hose connector with 1" hose nozzle - union nut S60x6 / 62mm / 2.44"
- 1x T-piece stepped DN50-DN25
- 1x IBC small valve with 0.5" plug-in coupling - connection S60x6 / 62mm / 2.44"
- 1x 2m hose DN25
- 6x Hose clamps
Set is delivered WITHOUT pictured IBC containers.
IBC standard tank connection DN25 basic module for 2 tanks
| Food safe: | Nein |
|---|---|
| Measured diameter: | 55 - 62mm |
| Outlet size: | 0,5" Steckkupplung |
| Tank connection: | S60x6 (2" / DN50) Grobgewinde - Innengewinde |
| Thread: | Coarse thread |
| UN approval: | No |
Data according to manufacturer. Errors and changes reserved.
Login
Passendes Zubehör
IBC standard tank connection DN25 extension for 1 tank
€22.68*
With this set you can add another tank to an already existing connection of two IBC containers (Item no.: YP0475) and thus triple the storage quantity. Please note that the tank connector set is intended for connecting IBCs standing next to each other! Do not stack! You do not need any additional sealant.Scope of delivery:1x IBC hose connector with 1" hose nozzle - union nut S60x6 / 62mm / 2.44"1x T-piece stepped DN50-DN251x 1m hose DN254x Hose clamps
Product number:
YP0476
T-piece stepped DN50-DN25
€5.03*
Our T-piece stepped is best suited for the connection of two IBC containers. Thanks to the steps, you can put the hose over in your desired size and then fasten it with a hose clamp. To do this, you only need to shorten the T-piece with a saw, for example. The T-piece is suitable for hose sizes DN50-40-32-25mm..
Product number:
TVS-T
Set of 5 hose clamps 25-40mm / 0.98-1.57", type W1
€3.77*
Clamping range:
25-40mm / 0.98-1.57"
Our hose clamps are available in sets of 5, are made of galvanized steel (type W1). For a good stability and tightness when connecting, for example, a smooth-walled hose with a hose nozzle / hose adapter provides the hose clamp. The clamping range is between 25-40mm / 0.98-1.57". When tightening the clamp, the inner diameter becomes smaller and thus the hose is sealed with the respective hose adapter. The bandwidth is 9mm / 0.35".
Product number:
4000058