IBC quick tank connection DN25 basic module for 2 tanks

We always recommend venting IBC containers! But especially when IBC tanks are stacked and connected by a tank connection set, venting of the container below is advisable.But why do I need a vent for stacked IBC tanks? - We enlighten you!1. If you stack several IBC tanks and connect them with each other, the lid of the IBC below must in any case be sealed water- or air-tight! If this is not the case, as soon as the maximum filling level has been reached, the water will leak through the lid at the top of the IBC. This case also occurs with vented lids, since water can escape from the vent as well as air.2. If the lid on the IBC container is now closed watertight or airtight, the air is consequently held in the IBC inner container and a counterpressure is formed to the inflowing water. When the two stacked IBC tanks are connected to each other via the valves attached to the tap, the inflowing water prevents the air from escaping from the tank connection.As the process continues, the internal pressure of the air bubble of the lower IBC container becomes at least as great as the water pressure of the inflowing water. Therefore no more water can flow in afterwards and the lower tank can be damaged.The solution: Our tank venting set!You mount a tank feedthrough at the top of the lower IBC container and connect a vent hose to it with the help of a cable tie. You attach the hose to the upper IBC tank (see illustration!). By mounting the venting hose, the air can escape first.If the maximum filling level is now reached in the lower IBC container, the water in the hose starts to rise. Thus, you can fill both IBC tanks to the maximum without any problems.Scope of delivery:1x 2m hose 0,75" (~20mm)1x 90° tank bushing with hose nozzle 0,75" (~20mm), gasket and 0,75" lock nut2x cable tie

You want to connect a total of three IBC containers? Then this IBC tank extension is perfect for you. Thanks to a tool-free assembly, you are very fast in the assembly of three IBC tanks with this set.Prerequisite for this set is the basic module TVS25Q2 (connection of two IBC tanks). Please note: The containers must stand next to each other, not stacked! If you want to stack the IBC tanks, you need a vent for the IBC container below.The hose with a length of 1.2 m / 47.24" can of course be shortened with the help of a cutter knife or garden shears, if the containers stand directly next to each other.The three IBC containers are connected by means of a stable, patented clamp connection. You can completely screw the set together in advance and then mount it to the tanks. Thanks to the rotatable union nut, no turning of the hose is necessary.Scope of delivery:1x Adapter S60x6 to 1" fine thread AG1x Fitting t-piece with 1" IT - anti-twist protection1x 1.2 m / 47.24" hose DN252x Hose adapter 1" - straight