IBC ball valve - union nut S80x6 / 80mm / 3.15"
- compatible with MAUSER (HOOVER) REPALTAINER **
- new & sealed
- incl. gasket & screw cap
Product number:
YP0145
EAN:
4260411311454
Product information
Our ball valve with the rotatable union nut size S80x6 (2" / DN50) is compatible with many IBC containers, but especially for the so-called "repaltainer". Due to the built-in ball, which serves as a shut-off body, you are guaranteed a high tightness and you can remove the liquid from your IBC tank without any worries.
With a rotatable union nut you are spared a complicated assembly and in addition the material aluminum protects against corrosion. The valve itself is made of PE.
Thanks to the outlet size of S60x6, you can easily connect other adapters and connections.
With a rotatable union nut you are spared a complicated assembly and in addition the material aluminum protects against corrosion. The valve itself is made of PE.
Thanks to the outlet size of S60x6, you can easily connect other adapters and connections.
IBC ball valve - union nut S80x6 / 80mm / 3.15"
| Food safe: | Nein |
|---|---|
| Measured diameter: | 74 - 81mm |
| Outlet size: | S60x6 (2" / DN50) Grobgewinde - Außengewinde |
| Compatible with: | MAUSER (HOOVER) REPALTAINER ** |
| Tank connection: | S80x6 (2" / DN50) coarse thread - internal thread |
| Material: | PE (Aluminium union nut) |
| Thread: | Coarse thread |
| UN approval: | No |
Data according to manufacturer. Errors and changes reserved.
Login
Passender Zubehör-Hahn
Valve hose nozzle 25mm (1 inch) – swiveling
€15.96*
Outlet size:
Hose nozzle 1" (~25mm)
Our IBC accessory tap with a small stopcock and a hose nozzle on the outlet side for connecting hoses.The union nut used is rotatable and serves as an anti-rotation device. This gives you a lot of flexibility when mounting it to the IBC stopcock. Available in the variants:Hose nozzle 1/2 inch (~14mm)Hose nozzle 3/4 inch (~19mm) Hose nozzle 1 inch (~25mm) This accessory tap is not suitable for direct mounting to the IBC container, but serves as an additional stopcock, which is screwed to an IBC outlet tap (see category replacement taps).
Product number:
YP0419
Variants from €14.28*
Kunden kauften auch
IBC HDPE spacer with S60x6 coarse thread on both sides IT x ET
€25.20*
Variant:
HDPE
Our IBC spacer is made of very thick-walled HDPE solid material and is therefore very resistant and stable. The HDPE plastic with a wall thickness of 16mm / 0.63" allows direct mounting of the IBC outlet extension to the inner container. You can also screw the spacer directly to the IBC outlet valve. On the outlet side and tank side, the extension has a coarse thread S60x6 (internal thread x external thread).
Product number:
HD160
Variants from €10.92*