IBC quick push-in bulkhead fitting 1" ET
Product information
The quick push-in bulkhead fitting is the perfect problem solver if you want to extend your IBC container with an additional outlet. The feedthrough made of robust PP plastic has a 1" fine thread - external thread.
All you have to do is drill a hole in a flat spot, clean the edges and then slide in the tank grommet. Then tighten the nut from the outside. No countering / screwing from the inside is necessary.
All you have to do is drill a hole in a flat spot, clean the edges and then slide in the tank grommet. Then tighten the nut from the outside. No countering / screwing from the inside is necessary.
IBC quick push-in bulkhead fitting 1" ET
| Food safe: | Nein |
|---|---|
| Measured diameter: | 53 mm |
| Material: | PP |
| Thread: | 1" fine thread - external thread |
| UN approval: | No |
| Drill hole-Ø: | 43 mm / 1.69" |
Data according to manufacturer. Errors and changes reserved.
Login
Passend zu diesem Artikel
Bushing with 1" IT x 0.75" ET
€1.67*
Thread:
1" IT x 0.75" ET - BSPT
Our Buschings are the perfect problem solver when you need to adapt a thread from external to internal or from internal to external. The bushing has a fine thread (British Standard) on both sides with a 1" internal thread to 0.75" external thread. For a tight connection, the fitting has an O-ring gasket made of EPDM. For an even better tightness we recommend to use an additional sealant, such as a PTFE sealing tape. This is also available in our store!
Product number:
4000041
Fitting 90° angle with 1" IT x ET - anti-rotation protection
€4.61*
Our fitting with a 90° angle and a rotatable union nut (anti-rotation) for connecting fittings or pipes with a 90° change of direction. The external as well as internal thread has a 1" fine thread (British Standard).
Product number:
4000046
Fitting adapter with 1" IT x ET - anti-twist protection
€4.19*
Thread:
1" IT x ET - BSPT
Our fitting with a 1" fine thread BSPT (ET) and an anti-rotation device also with 1" fine thread (IT) for easy and convenient assembly. The EPDM O-ring gasket ensures a secure seal. The robust PP plastic ensures a long service life.
Product number:
4000048
Fitting coupling with 1" IT x IT - anti-rotation protection
€6.71*
Our fitting with a swivel union nut on both sides as an anti-rotation device with a 1" internal thread and including an O-ring gasket made of EPDM.
Product number:
4000047