Bulkhead fitting G0,75 inch ET
Product number:
YP0415
EAN:
4260411314158
Product information
The IBC tank bushings are equipped with a fine thread on both sides - external thread for the possibility of further screw connections.
In this way, further inlets/outlets can be created on the IBC container.
Please be sure to observe the specified bore diameter - this should always be selected as minimal as possible. In addition, it must be ensured that the respective hole is drilled in a flat / level place on the IBC and that the edges of the drilled hole are cleanly deburred (e.g. with sandpaper). Otherwise leakage may be the result.
Our tank bushings AG x AG are available in the following sizes:
- 0.5" ET
- 0.75" ET
- 1" ET
- 1,25" ET
- 1,5" ET
- 2" ET
Bulkhead fitting G0,75 inch ET
Food safe: | Nein |
---|---|
Gasket: | EPDM |
Material: | PVC |
Thread: | 0.75" fine thread - ET x ET |
UN approval: | No |
Drill hole-Ø: | 26.5 - 28mm / 1.04 - 1.10" |
Data according to manufacturer. Errors and changes reserved.
Login